Triac PCB in Kodak Quartz 850

[A_L_E_X]

Where is the triac PCB located in a Kodak Quartz 850 plate processor ? We have problems with the dev heater. When the temperature is low the dev heater starts to heat the dev but it doens't stop anymore and the temperature goes very high. Migtht by the triac itself ?

 

[tim81]

Yes, the problem is in the triac that causes the temperature to go very high. Replace it with the exact triac with the same specification. This will solve your problem. The triac is in the upper right portion.

assembly board