Standard Finishing
4Over

Announcement

Collapse
No announcement yet.

Dolev 200 power problems?

Collapse
Canon
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Dolev 200 power problems?

    My dolev 200 is acting weird. I am not sure what the problem is
    except maybe power related.

    I turn it on and the control panel comes on and the lights on the
    boards in front of the unit inside light up. It comes on for about
    2-3 seconds and everything powers off except for the fan. Other than
    that nothing is powered up. Anyone have any advice what to look for?


    Storm180

  • #2
    Did you find a solution to this problem? I am experiencing the exact same issue with my Dolev 200.

    Thanks,
    Michael

    Comment


    • #3
      Originally posted by storm180 View Post
      My dolev 200 is acting weird. I am not sure what the problem is
      except maybe power related.

      I turn it on and the control panel comes on and the lights on the
      boards in front of the unit inside light up. It comes on for about
      2-3 seconds and everything powers off except for the fan. Other than
      that nothing is powered up. Anyone have any advice what to look for?


      Storm180
      Hi,

      Try and pull out one board at a time and power up the Dolev each time you pull out a board. somehing is drawing to much current.

      Comment

      4OverStandard FinishingDuploSmartsoft (Presswise)AleyantCanonKBA
      4OverStandard FinishingDuploAleyantCanonGraph Expo4 PeesLabelexpoKBAKBA

      What's Going On

      Collapse

      There are currently 2918 users online. 53 members and 2865 guests.

      Most users ever online was 6,597 at 10:25 AM on 04-20-2018.

      Working...
      X