Xerox 3100 vs Ricoh 9200

I'm pretty sure it's a custom designed envelope feeder. I've seen it over the years in prototype form, and I think this year they finally perfected it and released it as a polished unit.
 
Feeding is not really the issue with Xerox if you have the HighCap feeders, it is the stacking that has to be babysat. Maybe someone make a envelope stacker.
 
I'm pretty sure it's a custom designed envelope feeder. I've seen it over the years in prototype form, and I think this year they finally perfected it and released it as a polished unit.
Feeding is not really the issue with Xerox if you have the HighCap feeders, it is the stacking that has to be babysat. Maybe someone make a envelope stacker.
There is a conveyor at the end in the Xerox videos...
 
You're not really comparing apples to apples with these two models based on speed and duty cycles.

The Ricoh C7210 is the model that most closely compares the the Xerox 3100 and KM C1100 (now KM C6100). The Ricoh 9200 is more on par with Xerox's Iridesse or KM's C12000/14000 series. As for reliability, this question is often asked in the forums and most people only have current experience with their own brand, so they can't truly speak to how reliable the latest model is of another manufacturer. These days, I think all of them are pretty solid based on talking to other shops in the area.

They all offer some form of operator replaceable unit/maintenance program if you ask for it. Service response is going to depend on your location - how close are you to the home office and parts warehouse is big factor.

Since you mentioned VDP printing, then RIP'ing power must be a consideration as well. All 3 brands offer the Fiery controllers, and usually offer 2 options: fast and faster. Make sure you're getting quotes on equivalent RIP's when getting bids. All 3 can also run envelopes.

You mentioned color stability across the machines. This is always a challenge for any brand. On the newer version of the KM's (C6100) they now have the IQ-501 which offers an in-line spectrophotometer and high speed cameras to constantly monitor color and alignment on every sheet. Xerox has something similar to this - I'm not sure if Ricoh does. If color is really critical, then I'd suggest getting Fiery's Color Profiler Suite along with your RIP's.

All of the brands offer similar in-line finishing. If you need something specific, it's best to check the specs on each vendors version of the finisher.

And lastly, you mentioned up to 300gsm...all of the models mentioned support at least 350gsm, simplex or duplex, some do up to 400gsm.
 
The Ricoh C9200 actually handles stock up to 450gsm! And it also has an inline calibrator and a high speed scanner for color accuracy feedback. I have a bunch of these that are running well over a million pages a month and are just cranking away. Which sounds like way more machine that the OP is looking for. The Ricoh Pro C7200 series machines are more likely a better fit.
 
FWIW, while I'm sure most people could care less about what model number ends up getting assigned to a printer, those of us dinosaurs who have been around a while sometimes get a chuckle out of it. The 3100 for example was also the model of small floor copier Xerox had in the 1970s and wasn't terribly reliable. The 9200 was also a copier in the 1970s, the first high-speed b&w copier that had no peer, at the time. It was also featured in the movie '9 to 5'.

(We'll now return to your regularly scheduled program..)
 
FWIW, while I'm sure most people could care less about what model number ends up getting assigned to a printer, those of us dinosaurs who have been around a while sometimes get a chuckle out of it. The 3100 for example was also the model of small floor copier Xerox had in the 1970s and wasn't terribly reliable. The 9200 was also a copier in the 1970s, the first high-speed b&w copier that had no peer, at the time. It was also featured in the movie '9 to 5'.

(We'll now return to your regularly scheduled program..)
3100 was a Ricoh fax machine like 20 years ago.
 
Xerox sells a very high end envelope feeding system for the Versant line. If you have 10+ Versants you can easily justify the expense of a single machine that has a dedicated envelope feeder. I saw it in Chicago last year, it was very impressive. I know Brian Segnit has an account on this forum. Is there any way to mention him to get his attention?

I have 2 3100s and an Iridesse, feeding has never been a problem, getting the envelope to pass all of the way through the machine is a real trick. I have a Canon 710 and 910 exclusively for envelopes. The more I read these threads, it really makes me wonder if I'm being short changed with the caliber of field techs I have in this region.
 
No, almost entirely uncoated stock. As far I can tell we've avoided inkjet for quality reasons - the sample output I've seen looks pretty awful. Also we like having multiple smaller machines to spread the load/redundancy. My understanding of inkjet is that it's good for a handful of very high volume runs but if you're running a large number of medium volume runs concurrently it's probably not a great option.



That's great information, thanks!
Hi Graeme NZ, The Ricoh c9200 and c9210 would represent bigger, faster more productive units that the Xerox 3100. That's been said above by jwheeler and is spot on. The equivalent Ricoh is the c7200 and c7210. Having 14 digital presses is extremely resilient as you hardly notice if one or even 2 or 3 are being repaired. However, most operators can feed and manage about 4 presses, so you need more operators and incur higher labour costs doing it this way. Also, with toner shortages with KM, I'd be inclined to mix and match a bit. My recommendation would be 2 x Ricoh c9210, 2 x Ricoh c7210 with 5 colour and maybe a couple RISO inkjet GD9630s for the commodity colour DM work (uncoated). These come with a very low click rate but are super quick and extremely reliable (there's no heat). The Xerox Iridesse is lovely but pricy and the Versants are light production machines on steroids. Remember the Versant evolved from the DC260. The fusers are pretty lightweight and they get bandy on heavy media. The solution would give an ideal mix of high quality, fast, productive, 460gsm compliant, 5th colour compliant and, with the RISOs, the lowest colour click compliant without spending big bucks and having one single device that still incurs downtime. There's nothing much in digital you couldn't do to a world-class level.
 
Xerox sells a very high end envelope feeding system for the Versant line. If you have 10+ Versants you can easily justify the expense of a single machine that has a dedicated envelope feeder. I saw it in Chicago last year, it was very impressive. I know Brian Segnit has an account on this forum. Is there any way to mention him to get his attention?

I would absolutely like to see this demonstrated in my shop. I have two Versants that are about absolutely worthless for anything. Maybe I'm in a Geographic location where Xerox just isn't that strong? I have two 3100s and an Iridesse. I am beginning migration to Ricoh, just finished an install of a Ricoh 9210. I have been a Xerox house for 6 years I've had like for like replacements done due to poor performance. I don't know how to get to anyone in that organization that would send out a qualified tech to evaluate my situation. Anyone know??
 
I am looking at a 9200 currently. CLick charges are .0063 b/W and .0229 color. I currently have a 7200 and the black click rate you mentioned is very low as well as the color. My click rates are .007 B/W and .0315 for color. This is in the States.

Anyone else looking at the 9200 currently?>??
 
I am looking at a 9200 currently. CLick charges are .0063 b/W and .0229 color. I currently have a 7200 and the black click rate you mentioned is very low as well as the color. My click rates are .007 B/W and .0315 for color. This is in the States.

Anyone else looking at the 9200 currently?>??
A 9200 is likely my next machine, though I'm hoping to see an Fiery FS500 RIP with SSD storage for OS.
 

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.


Learn how…….

   
Back
Top