Konica PF707 - 707m

[Davejh]

Hi all,
calling all the KM experts on here - need to pick your brains!
We have a c3070 with an IQ 501 (which is great) and a long sheet feeder. We have been offered a pf707 feeder (which we should have had at the start). I understand the 707 isn't compatible with our machine and we need a 707m. So the question is can you convert/modify the 707 to work?

Thanks in advance.

 

[Ynot_UK]

Hi all,
calling all the KM experts on here - need to pick your brains!
We have a c3070 with an IQ 501 (which is great) and a long sheet feeder. We have been offered a pf707 feeder (which we should have had at the start). I understand the 707 isn't compatible with our machine and we need a 707m. So the question is can you convert/modify the 707 to work?

Thanks in advance.

Unsure of the answer to that, @jwheeler will most likely know. Although I seem to recall reading about this ages ago and the answer being negative.
Note if you do get a PF-707m, you will also need an FA-502 kit, which is installed underneath the centre drawer (that would be drawer 4 in your configuration) to take up the paper from the LU-202xlm long sheet feeder through to the engine.

 

[Davejh]

Cheers Ynot