• Best Wishes to all for a Wonderful, Joyous & Beautiful Holiday Season, and a Joyful New Year!

Offset ink density problems - help finding print consultant?

Canuck

New member
Hello, first post, I hope I picked the best forum. We're a small publisher of scholarly books, offset black only on uncoated cream paper, we're experiencing some ink density problems (light type / dark type) and don't own a density meter. I'm looking for any suggestions as to someone, preferably in the USA or if necessary in Europe, who could measure a few densities on our sheets and advise as to whether they fall within tolerance etc. We have only a very rudimentary understanding of all the highly technical things discussed on these boards, my apologies in advance!
 
Hello, first post, I hope I picked the best forum. We're a small publisher of scholarly books, offset black only on uncoated cream paper, we're experiencing some ink density problems (light type / dark type) and don't own a density meter. I'm looking for any suggestions as to someone, preferably in the USA or if necessary in Europe, who could measure a few densities on our sheets and advise as to whether they fall within tolerance etc. We have only a very rudimentary understanding of all the highly technical things discussed on these boards, my apologies in advance!
What press are you running,
is the issue ink density variation caused by either ink/water,
what experience level is your pressman
 
Hello,
1. I'm not sure what the press is, and the printer has clammed up, I'm not sure they'd say.
2. I wish I knew.
3. One of the top printers of art books in Europe. Expensive. We're using the highest quality paper, sewn binding, all the bells and whistles. Who was working on the press that day I don't know.
 
Hello Canuck,

I would - 1) Find a well known "Commercial Sheet-fed Printer" near you and ask them would they
check the IFT (Ink FilmThickness) with their Densitometer.

Regards, Alois
 
To measure the solid ink density (SID) you will need to find printed image areas that are 1) 100 % solid and 2) large enough for the aperture window (~2.0mm). I assume you only have the finished books and don't have access to any QC flat press sheets or folded signatures?
 
To measure the solid ink density (SID) you will need to find printed image areas that are 1) 100 % solid and 2) large enough for the aperture window (~2.0mm). I assume you only have the finished books and don't have access to any QC flat press sheets or folded signatures?
I have full sheets, yes. The book has not yet been bound.
 
Alois idea of asking a local printer to make measurements is a convenient idea.
They or you could do it at their plant.
 
Thanks to all for your comments and assistance. This seems like a very friendly place, I wish I knew more about the trade to hang out with you all. Will keep you posted if you like.
 
Hi will be a great idea, that you contact to the supplier of the manufacturer
of Ink,since they know very well the Tixotrapia (Viscosity( of the INK.

And they instruct you, what are affecting to the Viscosity of the ink, PH, substrate,etc.

Blessing

[email protected]
Mobile +WhatsAPP:+505 8861 1441

Managua,Nicaragua. C.A
 

InSoft Automation

InSoft Automation Unveils Imp Version 14

Revolutionizing Layout Planning and Automation

InSoft Automation announces the launch of Imp Version 14, the latest iteration of its industry-leading cost-based layout planning software. Packed with cutting-edge features, this release redefines efficiency, automation, and workflow optimization for printing and finishing processes.


Learn more…….

   
Back
Top