Recent content by mac_man_luke

Shocks are definitely bad, replacing both. AGFA quoted over AU$1000 but a local company is making me a pair for AU$100 each

Gears work fine Left gas strut is stuffed, removed it and can pull it in and out no issues. Will do both if i can get hold of them at a reasonable price (not likely knowing agfa!!)

Both shocks are connected but the one on the left is only haft screwed in at each end and if you screw it tight on one end the other falls out and it is a bit sloppy - believe it should be wanting to pull in? which it does not appear to be doing. right side is tight and fully screwed in and...

thanks, will have a look to see if we can spot the problem.

We have an Agfa Avantra 44 and recently started to have a problem with the bridge Its not going light when activating it but the motor is working and activating the sensor. No errors at all. Just staying heavy requiring 2 people lift to change the film. Any suggestions?

Ok thats weird - after a bit more testing with an open mind - disabling spot library fixed it - no idea how!

Hello all We have a job which we have to print on a 1 sided cast coated stock. It is printing pretty nice other than around any solids including inside reverses there is a fury pattern which is only happening on this stock. Anyone have any solutions to the problem? thinking maybe one of the...

thanks, now i now who to hassle with all my problems...just kidding :)

Thanks Had a 25 which i will stick in for now and pick up some 5 microns for the future. For some reason we were never told to change it and never though about it so its at least 5 years old! and we run up to 2 rolls a month.

yea, not really the right thread but was mentioned on the previous page. Ours is clogged and causing issues so trying to source one locally (and not pay agfas silly prices)

Does anyone know what micron grade the filter should be? presume its just a sediment filter?

Main board will be dead. Common problem.

There is a patch you can install to make it do the maths - i love it.

A few konica machines will do it but you can only use the bypass feeder with minimal capacity.

ours does the maths but no idea how it was turned on...