Search results

Glad to be of assistance, as for the reset of ink keys, i think it is only mechanical procedure not software, you can read this procedure at colorprintingforum https://www.colorprintingforum.com/threads/xl-105-ink-keys.4478/#post-17327 -never done it before-. As for Heidi Italia tell them to...

I think there is a set of screws under the feeding table that hold the knob in place with some vertical bars

Bah did not understand it was feeding grippers :S as said either tape gripper or check finger grippers have equal bite of paper

There is rail sucker bar for thin papers perhaps that might do the trick, search it on google

You could change the amount of ink key read from memory console, to do that you have to press the load job button and hold the flashing ! then pick one color -eg 1 black- now you can press + or - to compensate for more or less ink feed. Also when you put ink keys from memory to console with...

Before installing new rollers i would do a good scrub of oscillators with 5 or 6 pieces of cloth to remove any kind of metal skimmings

I measured today dot area/dot gain and found them wanting. I used patches of 100%/70%/50% and 30% with X-rite 428 dens and i try for 1.30C/1.40M/1.10Y/1.70K. +-10. Ctp uses AM round dot at 175 lpi -will check angles-. Dot gain Cyan 1.23 70% patch measured 5%/ 50% patch measured 14%/30% patch...

Haha very nice! Stole it gordo...

Thank you for your input but thing is, the machine i work, is a DI -waterless- so nip pressure is a tad bit different than conventional

The width of the roller on oscillation or plate τα πατηματα βρε αδερφε! :)

Good to see that your problem turned out minor, btw how much nip is needed to set your rollers -3mm oscillator and plate 3-3-2-2mm?-

Did you check for any stop -especially close to blanket-, is there a green/red light on -if green light is on something else is afoot-

Can anyone tell me how to make plate curve for waterless printing or at least a few pointers and if it is possible to "simulate" the dot gain of a conventional print? -using CTP with harmony instead of DI to build curves- Thank you in advance

How did you resolve the issue, we have the exact error in our ctp

did you manage to make it work?

I work with GTO -DI 1993 cpc 1.02 and instead of card reader there is a computer connected via rs422

No Title Here is a pic of the program, there are utils that tampers with density adjustment but i think it affects the laser imaging. There is a way to change the characteristic curves but i think its only for ductor strokes in accordance to speed -all zones button+flashing warning...

Does anyone know how to change the ink zone profile of CPC console or if anyone worked with DOS program of Heidelberg DI (GTO-DI 1993/1994). Also if anyone has english manual of CPC console -sadly have it in German-. Press have a GUI to image plates and calculate densities of ink zones but the...

Hi since i am new in DI press (Heidelberg GTO DI 4 color Presstek with Pearl) i wanted to ask a few questions: 1. What is the proper packing plate/blanket. Plates are from ctp 0,15mm -Toray- since imaging is not used and blankets i think are solids 1,95mm. 2. How much torque in newtons is...

Hello i was wondering a way to make a PDF file -or other form JDF/EPS etc- for use with COLORTRONIC console of KBA Rapida 104. I hope to make an automation from computer/CTP save job to disk and transfer to printing console for faster make ready PS If this is the wrong topic to post feel free...