Search results

There are some xerographic improvements as well. Diagnostic tool improvements also.

The flap is in contact with the interdocument zone of IBT belt and the toner control patches are transferring to the envelope.

Then 3 months later a new digital printing company opens up in direct competition.

Yes you are. There is a system software disk 1. That is the boot disk that you initially start with to reload the system.

If you want quality with volume, then igen is the way to go. And the iGen 3 or 4 is not 700k. Get a good used iGen and have it installed correctly. I do training for iGens. Just installed an iGen 3 with inline calibration, that was used and quality is beautiful.

Have the technicians tried doing a total registration setup on the machine yet? I had a similar problem on a 700i (an older J75) and after I did the total registration setup, it came out perfect. Does the inline densitometer not take care of the in to out density?

You may have a laser issue.

I didn't realize that a 700 developer could be used in a 250 due to the developer roll being ribbed.

Xerox docutech 6135 is the way to go. With that volume you will need two.

Dcp 700 Dcp 700 What firmware level is your 700? There have been firmware upgrades ever since the 700 came to the market. I would talk to the tech and find out if he has a firmware upgrade available. The upgrades that have come out are relative to this issue.

Toner Toner If you use American toner in a European machine you will have to replace the chips that are in the American toner. The actual toner is the same just not the chip in the cartridge.

3rd party Igen 3 3rd party Igen 3 If you still have questions you can call me at 714-292-6912.

What kind of volume do you do a week per machine?!?

DC5000 instead DC5000 instead I would look at buying a used DC 5000 with external rip. Better cost and runs heavier stock reliably.

FF vs Fiery FF vs Fiery Also a big disadvantage, the licensing on the "Free"flow. Fiery doesn't have licensing issues.

DC 5000 instead of 550 DC 5000 instead of 550 I would consider a DC 5000 from Xerox. Buy it used for about 25K and have it refurbed for about 12K and that is only a little more than half of the 550. Very good high volume machine and can run 280 GSM.

700 streaking 700 streaking Post some pics so we might be able to help. You can call me at 714-292-6912 if you like.

It was a B&W printer that had a built in rip and had an issue, until a fix came out, that it would print 7 pages and cycle then print 7 more and cycle...etc. until the file was finished. Had to do with the rip software on the bustled controller. That's why I wanted to know the configuration data...

This use to be an issue on the DC 460 family when sending a big job. The problem is not with the machine rather with the Fiery trying to "catch up" in the ripping/printing proccess. I would first look and see what version of software your Fiery is at(v1.01/1.1), RoHS or nonRoHS. Finally I would...

I would NOT run the 280 gsm as a 170gsm weight. Your looking at possible major problems down the line. The fuser temp and 2nd BTR transfer voltage are the 2 major things that are different using different stock weight. Use the profile you're using for the 170 gsm on the 280gsm. If that doesn't...