Search results

I see the same or similar problem for small commercial printers and quick printers...there are not any options for new duplicator/offset presses in the US other than a couple of Ryobi models & one Baum (formerly built by Heidelberg)...Hamada, Toko, Multilith, Chief, Gestetner and others have all...

I agree with Alibryan to some extent. Presses with bearers generally are known for better quality in that the cylinders don't have the force exerted on them with coming out of the cylinder gap, where with duplicator type presses you don't have that and can get a bouncing effect around the...

First, that postage sounds low even at non profit automated barcode rate, 2nd price this job with some trusted trade vendors and mark it up 30% (take the wholesale price and divide it by .3), this would be the absolute minimum for a starting point. Then consider the turnaround, the quality, is...

First, rule out the obvious, disconnect the machine from its power source and check the fuses for continuity with a multimeter (if you are not familiar with this then find an electrician to do it for you)...don't test this without disconnecting power first (voltage can be deadly)... Once you...

Hi Mr.PrintX, I own a Century 3500 in my shop and I am also an independent service tech and am glad to offer any help...while I am not factory trained on the 3500 press I do have the service manual and have gone through the press I have from feeder to delivery. Yes parts are no longer available...

Anyone out there every ran across a 2 color press fit issue where the marks and image at the gripper was dead on, the tail marks and image was dead on, but the middle of the sheet was out by 1mm in the direction the sheet goes through the press??? When I first saw this I did a double take and...

I agree with Larry in that you should be running to gray balance, in other words calibrate your plates to linear (25%=25, 50%=50 etc) then run test strip on press and measure your dot gain, create a curve in your rip with your recorded values, retest on press and tweak until your cmy gray...

Printing equipment for sale: TOKO R2SL 2 Color Press 13.3x18.5 $7500 AB Dick 360 + MONA NUMBERING $2500 Strate Flo envelope feeder $1500 Townsend T-51 Color Head Swing Away version fits Ryobi 2800 $1000 IGI numbering/perfing/scoring attachment $500 Macbeth RD-1232 press room color densitometer...

Up for immediate sale: AB Dick 360 with inline MONA number/perforation/score, great for business forms, checks, tickets, etc. or anything else that requires numbering, perforation, scoring, and diecutting while printing at the same time without the need for additional passes. Comes complete...

Any AB Dick Century 3000, 3500 or 3500S users or dealers out the have any brochures or sales literature on these model machines I would like a copy or PDF of it please. You can reach me at 678-859-707 Five or email me at sales(at)discountprintingservice.com Thanks in advance, John

We recently purchased a used Purup Eskofot Genesis DPX platesetter with a RipMate 4.2 front end. I have never used one of these until now, however I remember when they first came out and Mitsubishi promoted these as capable of process color and demoed them at the trade shows. So my question is...

i have an Epson 7600 which I am experimenting with. I have not used the G&J conversion kit. A printer friend of mine in Indiana was using the VIM system with a 4880 and running 4 color work on a Ryobi 3304, I was very impressed with it. I have been using a DPX Genesis that I picked up at an...

I buy used pre-press, press and bindery equipment....turn your used equipment into liquidated cash! CASH PAID FOR YOUR SURPLUS EQUIPMENT! Equipment wanted: Jaws RIP for DPX Genesis (with dongle & cables) Ryobi 3302's, Hamada C252's Automatic numbering machine (count, rollem, socbox, etc)...

From my years of computer & printing experience I would look at what processes are running on the RIP computer. You may have a conflict caused by a process running in the background. It is hard to say without knowing your computer's configuration. You may want to try a clean install of the...

I have a complete system: Pressmate FS Imagesetter 133lpi@2400x2400dpi Rip Station Computer with RIP software installed Currently used with TCP/IP configuration If you are interested call me at 678-859-7075 or if you don't need the RIP anymore and you have some Thermal Film contact me...

try googling Graphic Arts Supply

Don't know where you are getting your information from but I think you've been sniffing the blanket wash bottle a little too much...

Victor, I would like to talk with you about it. Email me your phone number, I would like to call you & talk with you about this topic in depth. Thanks, John Discount Printing Service CEO

The biggest problem I think is that there is a very small percentage of offset printers out there that are even aware of what inkjet CTP is, much less the quality that can be achieved, the much lower cost for both the equipment, consumables and production time for plate making. I have asked...

I think it was Dot Works...read this thread for more information on inkjet CTP: http://printplanet.com/forums/computer-plate/19645-tango-dotworks-should-g-j-concerned/2#post128189