Search results

Both Ryobi and heidelberg are oem for presstek, right? not a good option if you only have one plate supplier.

We use mitsubishi eco 1630III, pretty good

what about in our case, each roll of our plates is slightly different, 2% diffenrence, linearizion can make whole process stable to a known status.

Quote From 2018 techkon guide to G7 page 10, because our plate is not that stable, for safe reason, we use linearized plate as guide instructed. https://www.techkonusa.com/2018-printers-guide-to-g7/ Preparation of the Press Form The press form can be downloaded from www.idealliance.org, or...

One reason is if we do the G7 calibration we have to use linearized plate to print p2p target Another reason, We use polyester plate, each roll has slightly difference, around 2%, measured by techkon spectroplate, that is the reason why I calibrate each roll, looks like the plate is not stable...

here is my way to do the calibration, I do not use intend or actual press option, just 2 steps, any inputs? 1 I always use uncalibrate target to linearize the plate 2 use a software named curve4 to generate tvi curves for each press and paper, not the one from calibration manager.

plastic part? try diy with a 3d printer?

let us move to xenforo like everybody else

I guess, when knife at the home position, you should find two wires connect to a switch at that position, the switch might be malfunction or out of adjustment

my guess https://printplanet.com/forum/press-technology/sheetfed-web-offset-discussion/6874-difference-between-speedmaster-cd102-and-sm102

what time did you replace those rollers on water unit? looks like you need a new set

saphira roller? I guess QM46 only woks well with bottcher rollers

Please try to get one from buttcher, all I can think is the metering roller's problem

didi you get your replacement rollers from bottcher? btw, the water form to plate is 3.5mm at position 6, 5mm is too much

it looks like static electricity caused this to me, solution, try to using a fan to blow one end of a stack of papers a few time while holding another end, then put them in the tray, if not working add some moisture in your room

which band? check if there is any plate still stayed in diverter

my wild guess, using a ph test pen to check if the paper is acid free and leave them in room temp at least 72 hours

actually you can see it on your rip's output window, check green plate, roaming, that ll show you if the green is sold or screen.

looks like you are using indesign to do the separations, for a 2 colors 3985, you should only use spot colors, no matter you choose 4000dpi or 2400dpi, the setting will be override in rip, this is a host based separation, so you need to calibrate yoru rip first and uncheck in rip separations

I do like fusionpro simply becases it can only be installed on one computer, if I wanna do some work at home that is a big problem, deactivate, reactivate, huge pain, doen't like other software when I log into my account I can force to log out of software on ther computer, try something else