Search results

Yep, now that I have got a service book, recommended by Ken, I was able to check a few additional things. And it's running but I still may need a good once over.

No Title Still may need engineer help, but I have it limping along.

And yes I will adjust the end play and try it out. Also managed to get the service manual printed today

Eccentrics are set properly. And running correct to the diagram. I have set the nip on the rollers countless times on all rollers. I was advised to check a few things today on the phone, but I hope I can get that guy to come service the machine. I feel once we it back to working that it will...

Oh and that was a light grey, its not suspose to be dark. Now when I drop the water and ink rollers the first few sheets are even and color is great left to right. Then it goes light on the left edge (operator side). I am in Oakland MD, and will pay for the service. We already contacted...

No Title Left edge washes out.

I am at my wits end with this, and it's costing us money being down, we need someone that can fix it here asap and will pay for the expertise. wenot back to the old water form again and now it's on the cam. And striping. Repaired nipped all the ink rollers and I mean all. And remember did...

Review of the earlier attached pdf, adjustment was preformed but did not change the result

I sent you a pm earlier

It's the same gear really used from the old form roller and putting it back on the original form roller has the same result. They only time that the form falls to the cam is when there is no gear. If I press it I cam make it touch but I have press it with a lot of pressure. The picture is...

So the springs you speak of are located where, the only ones I see that are connected to the water form do not cause it to drop. Even swapping the ones from head 2 that works to head one same result. I fee if I can get this to drop correctly I can tune the rest of the issues. Yes I know about...

I have the adjustments in the operation book. I have a downloaded parts book. The adjustments for the form do nothing to fix the hanging up of the water form. If I put the old water form in with out its gear it falls on the cam properly. if I put the new water form or the old one in with the...

All new rollers except for hard ones, inspected shafts for wear, all looks to be in good shape. All nips match specs. Except for water form to plate it won't drop properly with the cam. setting the rollers as per the book 2mm on meter osolator and 2mm osolator to water form. Measured...

I tried posting this before got no response, we have a abdick 9995 ryobi built unit with wierd toning issues and washing out issues. We though we figured it out with the water form but that fix was only on small coverage. Things we observed. When we turn on water form roller the operator...

On this 9995 changing the water form roller won't drop to the cam. Something is holding it back. I took the gear off my water roller and put it back in no gear and it drops fine, now the gear is the problem. It runs off that gear from the chrome water roller. How can I move the chrome...

Any help would be appreciated

The rollers on them can be super finicky, absent if some of the precision adjustments on other machines. You may want to start over with the chemistry of the water system when you have down time anyway. We found using a different solution we got more control and less catastrophic issues. We...

No Title Toning example yes it's upside down on purpose

First off my wife bought the business she worked at for 12 years. In that time 5 of those years the previous owner had me run abdick duplicators with plastic plates 9810 models. Now he never used the 9995 and I had a former pressman thst retired come in to help me get this 9995 running. It...