Search results

Don't cut the sheet. This system should work very well for kiss cutting. We have a lot of kiss cutting using a similar system from cito on our xl 106 Heidelberg. Once you send the company the files they will request some changes to be made to the file before preparing the flexible plate. I...

Google pertinax Counter die. Also check out YouTube. There is a YouTube tutorial.

If you're printing to European standard, ie fogra39, you can use the eci profiles to simulate the laminate. This is what we do and it helps a lot. Check the below link. Let me know if you still need help. http://www.eci.org/en/colorstandards/offset

Hi everyone, I was wandering if there is a guide or software for mixing CMYK and White inks to produce inks close to some pantone colors. If someone has any information about this, could you please share it?

I did... Even when this setting is selected it doesn't print properly on textured paper when the sheet size is big

Try using a smaller sheet, we have the same machine and it doesn't do well on textured paper when the paper size is big

Is it better to aqueous coat printed sheets before thermal bopp lamination? Will it make the laminate adhere better?

Why don't you mix RO water with regular water to make it less corrosive but more suitable for misters

Mscotty can you please explain the process of doing this digitally and what finishing machines are required.

Mscotty are you referring to spot foil from lamination?

I've had the machine for several month now and it's pretty good once you get the hang of it... It's mainly paper settings and how you setup the job that you need to get ready for. For example never run textured paper in banner format as the ink will not adhere properly. Try going to a smaller...

Fouad I have sent you a private message... I might be able to help you.

I have had this issue happen with flint F918 series, which is Vegetable based, and with a flint OVP varnish which is the protection varnish flint caries. The result was very high temperatures, scary, that we stopped the export of the job because we felt it's not safe to ship on the plane.

Try printing the 4 or 5 colors and cure them, then go a second pass and do the drip off... see if it works...

Hi everyone, I am looking for a solution to resample low resolution images in PDF files by upsampling them in a similar way photoshop does it by increasing the dpi and setting the mode to bicubic smooth. Anyone doing this?

It's been designed so that you print on transparent plastic in reverse for example cmyk and then white in select spots under the ink. Also it is designed to print on coloured substrates.

LEUV ink is expensive at the moment but the prices are going down as I noticed recently.

No company is selling enough machines in sheetfed offset... it's a good way to survive i guess(i.e. to sell consumables). Heidelberg doesn't manufacture inks, but recently they acquired a chemicals producing company in belgium called blue print. HUV is Komori's version of low energy UV which...

yes i did check their website, and contacted them to sample their dies but they didn't get back to me.

Does anyone have any information about Refractive Engraved dies or Unifraxion dies? I would like to know more about the concept and how the results are achieved.