adam470
Member
Hi this is a continuation on a previous thread "help with accuset 800"
The rip I’m using is apogee s2v2 up6 on w2k
I am still getting job time outs with this message in the pilot imaging window
05/06/2010 10:31:15 AM - No on-line processor present
05/06/2010 10:31:15 AM - Connected to engine
05/06/2010 10:36:07 AM - Job ’’ (81) started
05/06/2010 10:36:07 AM - Job ’’ (81) ended
05/06/2010 11:32:34 AM - Job ’HTV-T-Back.ai’ (143) started
05/06/2010 11:32:34 AM - Page 1 : Plane ’Gray’ started
05/06/2010 11:32:35 AM - Page 1 : Plane ’Gray’ ended
05/06/2010 11:34:35 AM - Warning : a job timeout occurred
05/06/2010 11:34:35 AM - The engine seems to be in a pending busy state
05/06/2010 11:34:35 AM - Trying to reset the engine
05/06/2010 11:34:57 AM - Job ’HTV-T-Back.ai’ (143) ended
The accuset control panel has
Busy
rip active 0c //sometimes it will send through a few centimeters
Attached are two files from the rip job log which don’t seem to match the engine message
View attachment log.txt View attachment Log message.txt
The file was just plane black text converted to outlines and sent from ai cs4 to the named pipe
Sorry about the long post I hope I haven’t scared everyone off
Thanks
Adam
The rip I’m using is apogee s2v2 up6 on w2k
I am still getting job time outs with this message in the pilot imaging window
05/06/2010 10:31:15 AM - No on-line processor present
05/06/2010 10:31:15 AM - Connected to engine
05/06/2010 10:36:07 AM - Job ’’ (81) started
05/06/2010 10:36:07 AM - Job ’’ (81) ended
05/06/2010 11:32:34 AM - Job ’HTV-T-Back.ai’ (143) started
05/06/2010 11:32:34 AM - Page 1 : Plane ’Gray’ started
05/06/2010 11:32:35 AM - Page 1 : Plane ’Gray’ ended
05/06/2010 11:34:35 AM - Warning : a job timeout occurred
05/06/2010 11:34:35 AM - The engine seems to be in a pending busy state
05/06/2010 11:34:35 AM - Trying to reset the engine
05/06/2010 11:34:57 AM - Job ’HTV-T-Back.ai’ (143) ended
The accuset control panel has
Busy
rip active 0c //sometimes it will send through a few centimeters
Attached are two files from the rip job log which don’t seem to match the engine message
View attachment log.txt View attachment Log message.txt
The file was just plane black text converted to outlines and sent from ai cs4 to the named pipe
Sorry about the long post I hope I haven’t scared everyone off
Thanks
Adam