Apogee S2 V2 Install Files

[tensor]

Hi
I do a couple of jobs a week on the side for a local printer. We no longer produce film for in-house needs but as long as my Proset 9400 keeps going I may as well make money out of it. I've just picked up a S2 V2 after my Hyphen RIP died. There was no way I could justify the cost of a new RIP.

Unfortunately instead of receiving the install disk I got the dongle plus Update 5 CD. I have found going back on the forum that a couple of members were kind enough to provide the install files. If any member could help me out I would be eternally grateful. If you have the manual and any drivers regarding the PCI PAC card that would be great too, though I think the drivers are installed with the RIP installation.

Greg

 

[VladCanada]

Do not waste your time, tensor
Apogee RIPs as well as Taipan/Viper DO NOT support Proset 9400.

 

[tensor]

Thanks Jon for the install disks. VladCanada is right, I found that Apogee won't connect to the 9400. Luckily I've just picked up an Accuset cheap. Seems nuts that I can connect a Harlequin or Studiorip to the 9400, but Agfa's own rip doesn't support it.
Thanks all.

 

[VladCanada]

Because AGFA use APIS protocol (and APIS cable and connectors) for AGFA RIPs.
Proset 9400 - does not have APIS!