slpdesign99
New member
Hi guys I am new here glad i found this forum. I have bee working ing the Prepress / Graphic design industry for 10 years. I am currently a production Manager for a samll ad agency in Australia we have just stated to send work to china but I am getting a few errors inconsistance. Ok here is my problem.
I have a client supplied cmyk EPS logo form illustrator CS2 with a colour mix of C=0 M=63.92 Y=100 K=0 (orange) set to overprint
I have placed this into Indesign CS2 pre-flighted the job and printd to a pdf 1.3 using Acrobat 5.
I then open the page in Pitstop pro 5.03 (did this after the job was printed AHHH)
toggled to the inspector and click on the logo. I get spot colour magenta with a tint of 63.9% but colour box visally shows as orange
This is how it printed. what is going on can anyone help me to understand this for the future?
I have place the pdf on our upload site so people can look at.
Link: [www.pace.com.au/upload/5656-VB-Brochure-P22.pdf]
any help would be great.
PS its the vertilux logo bottom left
Edited by: Scott on Mar 3, 2008 1:10 AM
I have a client supplied cmyk EPS logo form illustrator CS2 with a colour mix of C=0 M=63.92 Y=100 K=0 (orange) set to overprint
I have placed this into Indesign CS2 pre-flighted the job and printd to a pdf 1.3 using Acrobat 5.
I then open the page in Pitstop pro 5.03 (did this after the job was printed AHHH)
toggled to the inspector and click on the logo. I get spot colour magenta with a tint of 63.9% but colour box visally shows as orange
This is how it printed. what is going on can anyone help me to understand this for the future?
I have place the pdf on our upload site so people can look at.
Link: [www.pace.com.au/upload/5656-VB-Brochure-P22.pdf]
any help would be great.
PS its the vertilux logo bottom left
Edited by: Scott on Mar 3, 2008 1:10 AM