Yes sir that is right, lead clamp side edge is straight, but the trail clamp side edge dont line up,some short ,some long..so the image file from rip is crooked from middle to the trail side side edge..Not sure I understand the problem?
Can you elaborate?
Is it that the lines at top edge flush straight but lines at bottom don't line up, some short, some long?
Copy sir.. in addition to this problem, i observed and noticed that during the 0% dot test burning, the lasers turns off every 4seconds of burning/recording..but when i do this 0% test to other screen ctp, it's always on and doesn't turns off every 4seconds..Looks like synchronization problem- check metal plate of drum encoder(enc1) for loosing(bolts between encoder and plate)... if it’s ok may be encoder/pio board...
A 30-day Fix for Managed Chaos
As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line. “We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month. Learn how……. |