Eco3 Eclipse / Eclipse PRO Depends on which get delivered but both had the same 'issue'.
CTP Plates ECO3 problem
- Thread starter craveiro
- Start date
prepressdork
Well-known member
Ah ok. If I may ask, has the press experienced any issues as a result of cleaning off the remaining plate emulsion?
We were using ECO3 Eclipse. We swapped to the PRO version still with 'carry on' boxes, this problem has been entirely fixed this way.
We, now, have an entirely different issue but it has to with the balencers of the machine, and plate size swap.
For some reason balencers, tend to join together after loading a different plate (GTO) from our standard 730x600 size.
We have to open the front cover, and 'manually' adjust the balencers to match the 'home' with 'away', almost to the dot.
It fixes and allows us to re-load another 730x600 plate HOWEVER, everytime we load GTO it (error) presists and resets (joins together).
Similar threads
