Duplo 645 cutter/slitter/creasor

[MMP_Brad]

I am in need on the "Job Creator" software for the Duplo 645 cutter/ slitter/ creasor. We also have the folder.
Any help would be appreciated.

 

[QwazST]

I’ll see if I have a file. Duplo tech for a dealer in Iowa. Windows or Mac ? Also what folding option?

 

[MMP_Brad]

Windows 10, DC F1 folder

Thanks.

 

[QwazST]

Can you send me email to send file ?

 

[MMP_Brad]

You can upload to our website.
Follow the link. http://www.edmonton13.minutemanpress.ca/servicecenter/send_file.html

 

[QwazST]

Sent

 

[ztechire]

Hi, I also need a version of this for windows, DC645 , I need v1.5 though. Would you have this?
thanks

 

[HolgerSchwob]

Have a used DUPLO DC-645 and problems with my copy of the JobCreator-Software: I think the Software/Driver is to old for my machin, because i get "communication error 003". (Think they gave me the wrong software)
USB-Driver is "USB DC-645 1.0" "1.0, Job Creator is Version 1.2. I run it on an old WIN XP-PC, System recognized the machine and driver is running, but when i try to send/receive something to machine it propts the comm error.
I tested shorter Cable lenght, etc etc, tried everything possible so far so my last hope is try it with a newer software. On machine (Duplo) is firmare version 1.43.
Any idea what the problem can be, or somebody have newer releases of the driver/software?
The programming "manually" is much more timeconsuming than i thought ;-), also keypad of the machine is obvoiusly very used and the foil-keys are more or less out of life...

 

[ztechire]

Even though you have the USB port and driver set up it most likely you have an early version of the firmware, There is an option in the maintenance mode to switch on or off the PC control, early version fw does not have this option.

 

[HolgerSchwob]

The only thing i found is "HELP Mode: 61" Change the setting of the machine (8-Bit Switches) But in the service manual there is no comment about the function of the switches excpept the Switch 1 (for Paper interval / Mode 62).

 

[slinky]

I’ll see if I have a file. Duplo tech for a dealer in Iowa. Windows or Mac ? Also what folding option?

Hi!
Sorry to revive such an old thread...
Do you still have an installation of the Job Creator software for DC-645?
I've "inherited" an old machine and am in the process of bringing it back to life. So far it's looking pretty good. One of the feed belts is broken / missing, but that's a minor thing. The two line LCD panel for job input is a pain though, so it would be really nice if someone could help me out with the PC software.

 

[slinky]

Thanks @DYP , I got it! Much appreciated

 

[Sidoj]

Hi, I have the same problem.
Сan you send me installation of the Job Creator software for DC-645?

 

[slinky]

Hi @Sidoj, I've sent you a link over PM. Let me know if you can access it OK.

 

[Pennypicher]

Hi!
Sorry to revive such an old thread...
Do you still have an installation of the Job Creator software for DC-645?
I've "inherited" an old machine and am in the process of bringing it back to life. So far it's looking pretty good. One of the feed belts is broken / missing, but that's a minor thing. The two line LCD panel for job input is a pain though, so it would be really nice if someone could help me out with the PC software.

See if the belt doubled up on another. Have seen it before. Good luck on the software. Its a good but old machine. The parts that wear out and the ones not available by Duplo. The 646 is so much quicker and Ive heard the 648 is even more impressive!!!

 

[Sidoj]

Thank you @slinky , but i have error. Error name - Communication Error(001-10)

 

[slinky]

Hi @Sidoj ! I'm afraid I can't tell you anything more than what it states in the manual:

Communication Error (001) – (***):

The JOB Creator cannot recognize the DC-645.
Check the following.

1. Is the USB cable securely connecting the computer and DC-645?
   (-> P.18 "How to Connect the DC-645 to your Computer")
2. Is the DC-645 turned ON?
3. (Macintosh OS9): Is the USB driver copied in the [Extensions] folder in the [System] folder? Check to see if its use has been turned OFF?
   (-> P.32 "Installing Procedures" (Macintosh)].
4. (Macintosh OSX): Is a Classic environment launched?
5. (Windows): Is [USB DC-645 Ver*.*] registered as a USB controller in the [Device Manager] dialog?
   (-> P.30 "Installing Procedures (Windows)")
6. Is the USB cable shorter than 3 meters?

 

[DYP]

Thank you @slinky , but i have error. Error name - Communication Error(001-10)

Did you also install the driver? 32-bit or 64-bit which ever you need.

 

[Rob Moore]

Hi @slinky I was wondering if you still have the installation files for Job creator software? I've just bought a DC615 and have read that the software works on that too....hopefully!

 

[slinky]

Hi @Rob Moore, I have sent you a link in PM. Not too sure if it will work with DC-615, it does say specifically DC-645 in the window title. But let me know either way.