Help for G&J ML 950 OLP

[leo]

Hi everybody,

Our shop is running Dolev 800V with G&J ML 950 OLP. Normally, we are using 2 phases 220-230KV power. I suspect if we can use 3 phases electric power? Any experienced one, please advise.

It's much appreciated and thanks if any idea!
Leo

 

[VladCanada]

Hi everybody,

Our shop is running Dolev 800V with G&J ML 950 OLP. Normally, we are using 2 phases 220-230KV power. I suspect if we can use 3 phases electric power? Any experienced one, please advise.

It's much appreciated and thanks if any idea!
Leo

Leo, you use SINGLE phase 220-230 Volt (not Kilo! )!!!!
You can use 3 phase 220V power after some changes at Terminal block

 

[leo]

Leo, you use SINGLE phase 220-230 Volt (not Kilo! )!!!!
You can use 3 phase 220V power after some changes at Terminal block

Hi Vlad,

Thanks. It's 3 electric powe wire + 1 ground power wire is OK, right?
Cheer!

 

[VladCanada]

You are almost right, Leo, except ground wire - that's the frame ground wire without power.
So... 3 phases plus ground and no Neutral line.