Help
- Thread starter Ryan_D
- Start date
VladCanada
Well-known member
You put your question in wrong place, buddy...
But anyway: your On-Line Processor produces NOT READY signal, so you can't image more than one page.
LOW LEVEL signal could appear not only as result of lack of chemistry, but as result of broken wires/corroded contacts - remove the front cover and check one wire at the Level Sensor (installed on the bath wall);
ATTENTION! - the second wire of the chemistry level control schematic is GROUND WIRE green and yellow color coded and connected to the HEATING ELEMENT body.
But anyway: your On-Line Processor produces NOT READY signal, so you can't image more than one page.
LOW LEVEL signal could appear not only as result of lack of chemistry, but as result of broken wires/corroded contacts - remove the front cover and check one wire at the Level Sensor (installed on the bath wall);
ATTENTION! - the second wire of the chemistry level control schematic is GROUND WIRE green and yellow color coded and connected to the HEATING ELEMENT body.
Last edited:
Similar threads
PressWise
|
A 30-day Fix for Managed Chaos
As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line. “We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month. Learn how……. |
