rocketmanjm
New member
We are experiencing a severe window paneing issue. Ink builds up severely around outside of sheet and on lighter weight stock also severly on bottom cyl. it is so bad we have a ink slinging problem on longer runs. (5000 sheets). We just change from Host. Stein 7250 series to perfexion series but we are having same issue with Superior and and special colors and wikoff vinyl process so we don't think it is a total ink problem.
We also just changed to a new kodak plate p0071 and new processor, we just tested a sword plate from kodak that was a little better .
Weare using anchor 2 step etch jrz arsf but have tried 2 different 1 steps with no big difference. We use day 3000 blankets and have tried a few others with no real help .
We have checked and reset roller stripes and packings and pressures.
Any other suggestions?
We also just changed to a new kodak plate p0071 and new processor, we just tested a sword plate from kodak that was a little better .
Weare using anchor 2 step etch jrz arsf but have tried 2 different 1 steps with no big difference. We use day 3000 blankets and have tried a few others with no real help .
We have checked and reset roller stripes and packings and pressures.
Any other suggestions?