Konica Minolta AccurioPress C4080 / C4070 / C4065

I would recommend the C4080, but not the IC-609 OEM controller. Definitely go for the Fiery alternative.
We didn't really look at any of the inline finishing options.
Whatever you do, test decent quantities of your own jobs on your own substrates to be 100% sure a machine can do what you need it to do.
Pre-set showroom demonstrations are not a substitute for doing this.
Thanks for the advice. Much appreciated
Don't get the TU-510....that a pricey investment for something you'll be getting rid of in 5 years when you upgrade the printer. For perfing sheets, most likely your off-line folder has an option to install a perf wheel. If you want the TU-510 for slitting/cutting/creasing, get a Duplo 618 or similar device that will last 15+ years and not go away with your printer.

Something else to consider...when you have a complicated inline finisher like the TU-510, it will go down occasionally. This will take your whole press down so you can't print until the tech repairs the finisher.
 

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.


Learn how…….

   
Back
Top