Looking for Scitex Lotem Local Controller board version 3

[alekbelia]

Hi guys

just looking for Local Controller board version 3:
PWB # 188A2L658B
CAT # 503C2L658S

Regards

 

[printmomo]

Got one. Please call 513-312-7154

 

[Designer75]

Hi guys,

I need the same part Local Controller board version 3
PWB # 188A2L658B
CAT # 503C2L658S

does somebody have it?


Thanks.

 

[alekbelia]

The board is too pricey. After few days of hardware debugging I repaired my board adding only one resistor.

 

[skymaster]

re

re

Hi
Can you explain which resistor it was
Thanks

The board is too pricey. After few days of hardware debugging I repaired my board adding only one resistor.

 

[alekbelia]

All resistors in digital inputs are grouped in chips. You need to start debugging when you know what is not working. Following the wrong signal and measuring with avo-meter and oscilloscope you can describe part of the plate. Reading parts signatures you can exactly restore schematic and functional of this part of the plate.
This is not new but you need qualified electronic engineer.
In my case R-matrix has one broken resistor. The real problem was that resistor can be measured and was slightly out of tolerance. But not working actually.
As a result Lotem report that input clamp arm does not reach home position.
Sorry for the ugly english.