Man Roland 704 SPS-BUS

[mattdj]

Hi All

We run a Man Roland 704 1995 and have a problem upon start up

When we power up in the morning it goes through its motions and then shuts down and the green lights go off , although the monitor stays on and usually reads the below message

Failure of SPS
SPS-BUS Failure of SPS
SPS-BUS No data transmission
SPS-BUS Trouble when reading machine control data
SPS-BUS Trouble when sending data

It can take 3 or 4 power ups until it starts and will then be fine

Anybody out there had a similar problem and know a solution?
Any help appreciated
Thanks

 

[Ret Heidelberg Instructor]

What does Man Roland or whom ever owns them now have any answers for you regarding this problem? Sounds like you need a Sparky that Man Roland trained.

 

[adsonwheels]

We are a wrap company and are looking to start doing our own production. We are considering purchase of an HP latex, laminator and plotter. You can see the type of work we do Car Wraps, Vehicle Fleet Graphics, and Mobile Billboards -Ads on Wheels®. We are looking for some recommendations on the equipment...thanks.

 

[kbarz]

check out your grease lube alarms... had this problem and found the problem was in the auto lube.. kbarz

 

[Green Printer]

We are a wrap company and are looking to start doing our own production. We are considering purchase of an HP latex, laminator and plotter. We are looking for some recommendations on the equipment...thanks.

Do you presently broker out of all the wrap production?

 

[mattdj]

Thanks kbarz

Any idea how we can check the auto lube?