Does anyone have a customer that requires Flexo color match to an offset proof provided by customer? I have asked for the customer on multiple occasions to provide files of our targets (ECI charts) printed out with their settings to get some sort of a base line/target to feed into our iO table and create a new hot folder for this customer specifically. No such luck. Color correction is very difficult. We toil over each photo (hours) - correcting drop offs etc the best we can with min. dot that Flexo requires. Customer doesn't understand why the proofs are different and aren't matching his Offset proof. We just aren't able to hit some of his images... most require stochastic printing. We have Hybrid settings.. however that only helps if dot exists... it does nothing if there is a color that stops short on the images provided. We just purchased Flexo tools plug-in from Esko to help with scum/scatter dot and image correction. Works great.. but we're still not hitting some drop offs etc. Does Anyone have any other suggestions on some other steps? settings are calibrated regularly and we fingerprint regularly.