Need Help with Konika Minolta Bizhub c6500

[newbie]

Hi

Been printing items on new Konika Minolta Bizhub c6500.... and latest project is using only 2 colors... PMS and black... the machine seem to print out the PMS color just fine, however, the black/grayscale has a slight tint of magenta, and sometimes cyan, sometimes yellow.... any ideas as to how to make it print true grayscale/black? the images are in grayscale... any help would be greatly appreciated. Thank you in advance.

 

[David Milisock]

Hi

Been printing items on new Konika Minolta Bizhub c6500.... and latest project is using only 2 colors... PMS and black... the machine seem to print out the PMS color just fine, however, the black/grayscale has a slight tint of magenta, and sometimes cyan, sometimes yellow.... any ideas as to how to make it print true grayscale/black? the images are in grayscale... any help would be greatly appreciated. Thank you in advance.

What is the black build in the original file?

 

[Bo3b]

what RIP do you have
If Fiery - try expert colour setting and changing cmyk setting to either Quick or Use source GCR
If Creo - make sure that you're not using any UCR/GCR settings

 

[newbie]

hi Bo3b

Thank you for your response... we are using Fiery... and will check out your suggestion.

 

[newbie]

Hi David

Thank you for your response... if you mean the image mode, they were all converted to grayscale in Photoshop...

 

[TerryWyse]

You'll find your answer in the Fiery Command Workstation software. In the color management settings, you'll have options on how to handle black.

Terry

 

[Alith7]

see previous thread here:
http://printplanet.com/forums/digit...ck-text-prints-cmyk-any-solution/3#post164932

it continues on Page 2, that should cover it.