I was wondering if someone could help me out, Im currently using the Kodak HRO plate with a Screen 4300s and a Kodak processor. I had the processor installed about 3 months ago and since we have had issues with plate wear on runs over 25,000 and the wear tends to start from the right edge and creeps in. We have had a Plate specialist in and he tried to blame in on the press and there couldn't be anything within the processor which could be doing it. He since has had a look at the press and tested the water/alcohol and said it could be down to that but we have since drained and re-filled but the problem still exists. The unit which you see it on the most is the Black (Which is the last colour to go down) but it also happens on other units as well
Any help would be appreciated
Scott
Any help would be appreciated
Scott