Presstek Anthem Water Wash won't start.

[dmrivet]

I have made sure the power to the machine is not disrupted and it was on and the e-stop was off. The washer just won't turn on. Any ideas? Googling this as I stand by.

 

[JLRobertson]

Will it cycle if you turn the main power off, and then back on? The plate sensor on the feed-in lasted about a month in mine.

 

[Captweez]

Check the water level in the first tank, and if it seems alright, jiggle the sensor float. Sometimes they get stuck.

 

[TheProcessIStheproduct]

also check e-stops with multi-meter, sometimes they stay open, I had to un-hook one that was acting up...

 

[dmrivet]

I found the problem. A wire came off on the emergency stop. All fixed now. Thanks guys.