Predisposed
Member
What file type should I be using to send to an EFI colourproof rip from Prinergy, PDF would be best, but if anyone is doing this already what do you use and do you get any problems?
PRINERGY to EFi Colourproof
- Thread starter Predisposed
- Start date
JohnHemsley
Well-known member
It would be best to send a pre rastered file to the rip. We send 300DPI compressed tiffs with a little anti aliasing. No problems so far....
rotarypower3
Well-known member
With a gigabit network 600dpi tifs are good for 4col work. 300dpi is too low for contract proofing, especially for small type. For spot color jobs you're better off with 1bit tifs to allow colorproof to get the spots as close as possible.
..
..
Similar threads
PressWise
|
A 30-day Fix for Managed Chaos
As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line. “We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month. Learn how……. |
