wonderings
Well-known member
I am trying to print a job on a very light weight bond stock. I do not have the exact info on the paper, its stuff we have had sitting around for a long time with no package. It is lighter then standard stock bond paper (78gsm) we carry. I have run this before on our DC260. I would sometimes have the problem I am having now, and it usually seemed to be happening when the room was very hot. Now I am trying to run this on our J75 and am getting the same issues I have had before. I have run this job before (about 2 months ago) on the J75 with no issue.
Now my question, is there anyway to adjust the fuser temperature to lower it for this paper so I can get this done rather then waiting a day and trying it first thing in the morning when the J75 is "cold"? I remember when demoing a C75 on some tough stocks we had that they boosted something in the machine to print on a thick textured stock, it was in a maintenance area.
Anyone have any ideas, or have had similar problems and found a solution?
Now my question, is there anyway to adjust the fuser temperature to lower it for this paper so I can get this done rather then waiting a day and trying it first thing in the morning when the J75 is "cold"? I remember when demoing a C75 on some tough stocks we had that they boosted something in the machine to print on a thick textured stock, it was in a maintenance area.
Anyone have any ideas, or have had similar problems and found a solution?