problem initializing carriage motor thermoflex wide l kodak

[mustafaomara90]

I have a problem in thermoflex kodak wide l 5280 in carriage motor and i have change all this parts to test the machine but this problem has not yet resolved
https://www.4shared.com/video/4rI_L1XQfi/VID-20190413-WA0030.html this video the problem

 

[mustafaomara90]

plz help

 

[Angel Feliz]

Hello

you must provide more info in order to have a better understandimg of the problem.

Error #?

Give a detailed problem description.


Regards

 

[mustafaomara90]

vedio attachment for this problem and what about information tell you

 

[mustafaomara90]

https://www.4shared.com/video/4rI_L1XQfi/VID-20190413-WA0030.html

 

[mustafaomara90]

plz help

 

[mustafaomara90]

Angel Feliz

 

[Angel Feliz]

Hi

please send me another link where I can see the video. I have not been able to see it at the shared website link.


Regards

 

[mustafaomara90]

https://m.youtube.com/watch?v=tehQfYl28Cs&t=24s

Angel Feliz

 

[Angel Feliz]

Hi

definetely not enough info to help you with the video.

I need more detailed info.
Printconsole error #?
Access to serviceshell?

Why are you troubleshooting the equipment without all neccesary info?



Without that info I can't help you

 

[mustafaomara90]

this is serviceshell when to initializing carriage motor when starting the machine

Angel Feliz

 

[mustafaomara90]

carriage motor don't stop when arrived to 6001 step
Angel Feliz

 

[Angel Feliz]

Your problem could be related to
1) carriage motor encoder problems.
2) Carriage Driver Board Power supply problems
3) mpe board nvs settings


You need an specialist to help you out to trouble shoot this problem.

Regards
AFG
​​​​​​​

 

[mustafaomara90]

thanks Angel Feliz
The problem has been resolved the problem in sensor carriage but there are problem again in drum

 

[mustafaomara90]

[No message]

 

[mustafaomara90]

Angel Feliz

 

[Angel Feliz]

Hi

​​​​​assuming that your nvs parameters are OK . check your drum.encoder,
1)check voltage at the input of drum driver
2) clean the drum enconder band
3) do a drum cal command

Regards

 

[mustafaomara90]

do you have any engineer come to repairing this machine in egypt

 

[mustafaomara90]

Angel Feliz

 

[mustafaomara90]

Angel Feliz