Ricph JP4500 Print Driver?

[lukydevil]

Just purchased a Ricoh JP4500 and I'm having a hard time finding that specific driver on there web site, will the Ricoh universal print driver work for that machine, or is there a specific driver made for that machine that i should use.

 

[msaeger]

For that one it looks like you need to look for the driver for the print controller model not the duplicator model. I think type 40 is what you have this is the page for type 40 Ricoh USA - Support Center

It sounds like it could be type 40 or type 80 but i'm not exactly sure.

 

[lukydevil]

For that one it looks like you need to look for the driver for the print controller model not the duplicator model. I think type 40 is what you have this is the page for type 40 Ricoh USA - Support Center

Thanks for the reply..I noticed when looking for the manual on Ricoh's site, they give you the manual for the JP4500 and for Type40 RCP40. Is that what I should be looking for Type40 RCP40?

BTW you where right about my Gestetner 5499 after doing some test with my meter I pulled the power supply off and overnighted the part to Hytech. They fixed, I received and it's already back on the machine and running..Thanks for heads up about that company!

Just took a look at the link you provided...It looks like just what I need....AGAIN THANKS FOR YOUR HELP.

 

[msaeger]

BTW you where right about my Gestetner 5499 after doing some test with my meter I pulled the power supply off and overnighted the part to Hytech. They fixed, I received and it's already back on the machine and running..Thanks for heads up about that company!

That's awesome you got it fixed ! If you would have had a tech out they would have probably used Hytech too, they are pretty popular. That's who we use as well.

 

[lukydevil]

If you would have had a tech out they would have probably used Hytech too

There was a business card on the side of the machine for a company who used to service it...We tried to have them come out and look at it, but they did not service our area..Long story short they too recommended Hytec thats who they use for board repairs.