I have been battling with for over a year with lines coming up on my plates. They are going all the way across the plate for the tail to the gipper. I have tried everything I can think of from cleaning every lens that i know of, calibrating the diodes, running half power (first 15 the 16-32) and still getting lines. I have attached a picture for reference. We talked to screen about this and they said try to capture the lines on a C1 test and I did then sent it to them and haven't heard anything for about a month. What gets me is that some days it will be fine, somedays it will be the first couple plates then be fine. Does anyone have a solution or suggestions for me to do? Or even point me into the direction of a problem. If you need some specifics this is what we are running:
RAMpage V9.2
Kodak Sword Exell Plates (2sizes (600mm x 730mm x 30mm) and (340mm x 505mm x 20mm)
If anyone can help me out i would appreciate it
RAMpage V9.2
Kodak Sword Exell Plates (2sizes (600mm x 730mm x 30mm) and (340mm x 505mm x 20mm)
If anyone can help me out i would appreciate it