Separator Page

[jdunning]

Need to add a Separator Page to a step and repeat job.
Adding a separator page to a step and repeat book job. We are printing a book job for perfect binding and would like to add a blank page at the end or beginning of the job that will pull a colored sheet from a different drawer to act as a separator. Easily done when printing one up but we would like to print two up on 12x18. When we go to use the step and repeat/stack section on the fiery, the mixed media becomes unavailable. Any suggestions?

 

[usbox]

i am also looking this information, any one help us

 

[Rick]

separator

separator

can you step up then save to mailbox.
then program it thru there?

or step up offline with pc or mac and use the characterization/separator feature.

you can add a blank page to print form the color paper drawer if that works.

 

[jdunning]

Conflict

Conflict

There is a conflict when you try and use mixed Media and the Booklet options which is where you also find the blank page. I was hoping to avoid offline set up.
Thanks for the suggestions though. I am starting to think that the Fiery just can not do it.

 

[arkay_desai]

Hi

Check with heidelberg's Prinect software,

Regards
Arkay