Suprasetter A 106 Gen V : Recorder Error 5433

[raj9469]

Hello friends,
Our Suprasetter A 106 Gen V, Showing an Error "Recorder Error 5433" saying "An error occurred when conveying plate from the load table to the drum"
And solution is "Run the error Correction. Restart the device if the error still occurs. Restore an Error Free configuration of the CTP user interface if the error continues to occur after the restart"

I did all suggested solutions, but still the error occurs again. If anybody had over come this error kindly tell or any suggestion please tell me

Thanks

 

[Greg Eagel]

Were you able to resolve the issue? Our team may be able to help.

+1-773-545-7700
www.viprofix.com

 

[raj9469]

Not yet, we have not solved it.

 

[Ozkan Hangisi]

Check the guide plate (switch blade) between load table and drum. It might not come to exact load position.

 

[raj9469]

Check the guide plate (switch blade) between load table and drum. It might not come to exact load position.

yes, checked and solved the problem, it was displaced. . .

 

[Mr Anderson]

yes, checked and solved the problem, it was displaced. . .

Hi
I just got this similar error on our A 106 Suprasetter: 5439 - error occurred when conveying a plate on the load table.
I tried the solutions of correcting error
loading a non error fix on the ctp interface.
No Luck .
Can this error be solved without a technician as I only have a 2 hours before the roof comes down with the jobs needing to be plated?.

 

[Mr Anderson]

Check the guide plate (switch blade) between load table and drum. It might not come to exact load position.

Hi
I just got this similar error on our A 106 Suprasetter: 5439 - error occurred when conveying a plate on the load table.
I tried the solutions of correcting error
loading a non error fix on the ctp interface.
No Luck .
Can this error be solved without a technician as I only have a 2 hours before the roof comes down with the jobs needing to be plated?.

 

[Mr Anderson]

Hi All
Sorted, Its was the faulty sensor

 

[Arif Khan]

Nothing needs to be done; simply check the tension and condition of the drum belt as specified in the book.