Versant 280 Saddle Stitch not folding even...

[weeness]

We have two Versant 280's and one of them I am having an issue where the saddle stitch is not folding exactly in half. It is of by 2 to 4 mm. Our tech showed us how to log into the Admin account and adjust the fold for saddle stitch for our exact page count but the problem is when I save the setting and log out, one versant "B" will not keep the settings. The other Versant "A" does hold its settings which has me confused and the technician which if why I wanted to reach out on here to see if anyone else has had this issue.

 

[SoggyWinter]

There are mechanical fold adjustments in the booklet maker and HFSI settings for various book thicknesses that the tech should delve into or should call their second level support for help on.

 

[weeness]

Thanks for the tips. I've been in contact with the tech. He has done some mechanical as well. He is aware of this issue, I just wanted to reach out here to see if anyone else has ran into this issue.

 

[NorwoodPress]

We have two Versant 280's and one of them I am having an issue where the saddle stitch is not folding exactly in half. It is of by 2 to 4 mm. Our tech showed us how to log into the Admin account and adjust the fold for saddle stitch for our exact page count but the problem is when I save the setting and log out, one versant "B" will not keep the settings. The other Versant "A" does hold its settings which has me confused and the technician which if why I wanted to reach out on here to see if anyone else has had this issue.

This is interesting as I have the same issue, I log into admin and adjust the settings and folds perfect. Then go to reprint the job and its totally off still

 

[weeness]

This is interesting as I have the same issue, I log into admin and adjust the settings and folds perfect. Then go to reprint the job and its totally off still

It is kind of good to know that someone else has the same issue. Ours is still not fixed. Hopefully one of us will figure it out.

 

[Milo Wilson]

Are you at the current firmware on machine?

 

[PricelineNegotiator]

Are you at the current firmware on machine?

This is a relevant reply. I think our V180 had a similar problem and a firmware update and complete reset of all folding settings helped us.

 

[weeness]

I believe we have the fix and I cannot believe that I didn't know about this. When changing the stock, there is a setting in the 'Change Settings' for the fold that was created in the admin login and when you select that profile the fold is perfect.

 

[NorwoodPress]

I believe we have the fix and I cannot believe that I didn't know about this. When changing the stock, there is a setting in the 'Change Settings' for the fold that was created in the admin login and when you select that profile the fold is perfect.
View attachment 293056

Interesting, I shall have to give it a go