I am running a mac 0s9 using Viper rip 192 dropping PS jobs in the Hot Folder and sending to my accuset 800 for film. I am having problems with LPI when I output film. I can set a job up on the PC or a different Mac and save as a PS file 2400 DPI & 150 LPI but the film comes out
1200 DPI and it looks around 100 LPI. This never changes from ether host machine. I did find the print set up in the viper rip such as 3.1 software but still get the same output.
When I start a job the log file on the rip says 1200 dpi but does not tell me the Line per inch. I need 150.
Also when I set up or refill the cassett on the accusett 800 and manually set the panel to
"C0 600 0
200 NW " I can not change the 600 DPI to 2400 it keeps reverting back to 600
1200 DPI and it looks around 100 LPI. This never changes from ether host machine. I did find the print set up in the viper rip such as 3.1 software but still get the same output.
When I start a job the log file on the rip says 1200 dpi but does not tell me the Line per inch. I need 150.
Also when I set up or refill the cassett on the accusett 800 and manually set the panel to
"C0 600 0
200 NW " I can not change the 600 DPI to 2400 it keeps reverting back to 600