• Best Wishes to all for a Wonderful, Joyous & Beautiful Holiday Season, and a Joyful New Year!

wavy sheets output from digital

ibler

Member
Hi guys!

We just recently run a few thousand sheets on an ApeosPort C2200 (Fuji Xerox). After printing, i found out that the printed sheets were wavy both on the short end and the long end. We were printing both sides of the 100 gsm matte coated stock. 12x18.

Could this be because of the heat?

Thanks in advance!
 
Could this be because of the heat?

Yes.

Also, that machine does not have a straight paper path. The paper needs to make some turns to come from the paper trays, pass through the fuser and then come out.
 
Yes, heat would cause that.

Our C7000 has a decurler roll to limit this–I don't know if your machine has a manual decurling feature, so you should look into that.
 
We had a similar problem with our iGen3. It was limited to thin paper, 80# text, but there is apparently 2 heaters in the paper decks that heat the paper before it gets passed through the machine, for whatever reason, and Xerox disabled one of them to get the problem to go away.
 
Paper moisture

Paper moisture

I would also mention that you might want to consider investigating where your paper is stored. Too much, or not enough moisture also can contribute to this problem.

Hope this helps.
 

InSoft Automation

InSoft Automation Unveils Imp Version 14

Revolutionizing Layout Planning and Automation

InSoft Automation announces the launch of Imp Version 14, the latest iteration of its industry-leading cost-based layout planning software. Packed with cutting-edge features, this release redefines efficiency, automation, and workflow optimization for printing and finishing processes.


Learn more…….

   
Back
Top