After initial trouble, our epson 9700 worked well for 2-3 months. ie had to clean head 2-3 times a day for 8 hour run. Then too only magenta nozzles got blocked.
we use good quality sublimation ink.
last few days we get partial nozzle block after every 2-3 prints. cant sustain such wastage.
Now too, only magenta gets blocked.
After head cleaning cycle, nozzle check is fine and first print is good. trouble starts after 2-3 prints. and when nozzle check is done, it shows blockage. each time diff nozzle is blocked.
Do you think change in damper will solve the problem (even if we have to change dampers every 2-3 months is fine)
Generally what is the indication for damper change and what does it achieve?
we use good quality sublimation ink.
last few days we get partial nozzle block after every 2-3 prints. cant sustain such wastage.
Now too, only magenta gets blocked.
After head cleaning cycle, nozzle check is fine and first print is good. trouble starts after 2-3 prints. and when nozzle check is done, it shows blockage. each time diff nozzle is blocked.
Do you think change in damper will solve the problem (even if we have to change dampers every 2-3 months is fine)
Generally what is the indication for damper change and what does it achieve?