Xerox EX 80 Print server

[ad41061]

Hi, I had to replace the motherboard of the Xeroc EX 80 print server, I have all the disc's for the EFI and the License codes, will I be able to install ?

Thank you for you help.

 

[Milo Wilson]

As long as you kept the original hard drive in the unit and the board came from Fiery.

 

[ad41061]

Hi Milo, Thank you for the reply, yes I have to original hard drive, but unsure were the motherboard came from, but it is the same the same model number as the old one.
I have also swaped the bois chip from the old board to the new board it boots up fine but the fiery server wont start.

 

[Milo Wilson]

There is encryption on fiery motherboard. It has to come from Fiery to work properly. Aside from that there are ways to get that taken care of.

 

[asankaw]

I have the same issue. I have replaced the motherboard and after windows loading and when starts fiery it gets automatically shutdown.I tried reloading the system software but it doesn't show the required steps. I have attached screenshots. Please help to solve this problem