Xerox Versant 2100 - Great condition

[grafix]

Xerox Versant 2100 is a production color laser printer. Outputs 100 8.5 x 11 sheets per minute. Duplexes up to 350 gsm heavy cover stock. Finishing provides 3 hole punch, stapling and booklet marking in-line. Comes with the Fiery EX-P2100 RIP providing 10 bit architecture for 1024 levels per channel instead of 256 giving smooth gradients. This includes the Fiery Graphic Arts Package for enhancing images. Has always been under a service contract so all is working perfectly! Has X-Rite Color Profile Suite installed on the RIP. This is paired with my listing for the X-Rite i1 Isis 2 XL Spectrophotometer for accurate G7 calibration &17,500 Versant 2100 & $3,000 for the i1Isis 2XL. Should be purchased together for best color calibration.

 

[grafix]

I have just lowered the price $$15,500 or offer. Located in WA state. The i1Isis 2XL has been lowered to $1,850. These work great together as software is already installed on the rip.

 

[grafix]

Now $15,225 for a production printer, loaded with extras. New was over $130K at a discounted price. Fully operation at 100 ppm (based on 8.5 x 11 one sided) with no issues and has always been under Xerox maintenance. Many parts have been replaced making this like new. Software loaded includes a color calibration package, Fiery Color Profile Suite to get G7 calibration. That's bonus of a few thousand $$$. When paired with the i1ISis XL that is currently available $1,850 it is the most accurate color.

As of 7/15/25, black clicks 951,172, color 1,531,075.

Selling due to retirement.

Located in the Seattle area.

 

[tngcas]

Our shop sold two of these machines three years ago and barely got $5000 each for them. Primarily because they are EOL with Xerox so getting replacement parts now is nearly impossible.
Good luck. You'll likely need to find a buyer who will want them for parts to keep their existing machines going. Possibly an overseas buyer who can keep it running with their own parts DIY setup.

 

[grafix]

That's the story Xerox gives you. That want to sell more equipment. The truth of the matter is the 3100 & 4100 use virtually the same parts except for a couple. This according to my Xerox service tech.