Standard Finishing
4OverXerox

Announcement

Collapse
No announcement yet.

Duplo 645 cutter/slitter/creasor

Collapse
Canon
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Duplo 645 cutter/slitter/creasor

    I am in need on the "Job Creator" software for the Duplo 645 cutter/ slitter/ creasor. We also have the folder.
    Any help would be appreciated.

  • #2
    I’ll see if I have a file. Duplo tech for a dealer in Iowa. Windows or Mac ? Also what folding option?

    Comment


    • #3
      Windows 10, DC F1 folder

      Thanks.

      Comment


      • #4
        Can you send me email to send file ?

        Comment


        • #5
          You can upload to our website.
          Follow the link. http://www.edmonton13.minutemanpress...send_file.html

          Comment


          • #6
            Sent

            Comment


            • #7
              Hi, I also need a version of this for windows, DC645 , I need v1.5 though. Would you have this?
              thanks

              Comment


              • #8
                Have a used DUPLO DC-645 and problems with my copy of the JobCreator-Software: I think the Software/Driver is to old for my machin, because i get "communication error 003". (Think they gave me the wrong software)
                USB-Driver is "USB DC-645 1.0" "1.0, Job Creator is Version 1.2. I run it on an old WIN XP-PC, System recognized the machine and driver is running, but when i try to send/receive something to machine it propts the comm error.
                I tested shorter Cable lenght, etc etc, tried everything possible so far so my last hope is try it with a newer software. On machine (Duplo) is firmare version 1.43.
                Any idea what the problem can be, or somebody have newer releases of the driver/software?
                The programming "manually" is much more timeconsuming than i thought ;-), also keypad of the machine is obvoiusly very used and the foil-keys are more or less out of life...

                Comment


                • #9
                  Even though you have the USB port and driver set up it most likely you have an early version of the firmware, There is an option in the maintenance mode to switch on or off the PC control, early version fw does not have this option.

                  Comment


                  • #10
                    The only thing i found is "HELP Mode: 61" Change the setting of the machine (8-Bit Switches) But in the service manual there is no comment about the function of the switches excpept the Switch 1 (for Paper interval / Mode 62).

                    Comment

                    4OverCanonKBAAvantiXeroxSmartsoft (Presswise)Duplo

                    Automation Article

                    Collapse

                    Avanti
                    Why Would You Ever Want To Automate?
                    It seems far too complex, costs money, involves a lot of people, will take time etc etc. And then you run out of excuses. Read the article.

                    Standard FinishingDuplo

                    What's Going On

                    Collapse

                    There are currently 5986 users online. 103 members and 5883 guests.

                    Most users ever online was 6,611 at 11:23 AM on 02-27-2019.

                    Working...
                    X