Standard Finishing
4OverXerox

Announcement

Collapse
No announcement yet.

Changes not sticking

Collapse
Canon
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Changes not sticking

    Hi. I have a PDF that needs changes. having font issue. went into acrobat where the font is seen or ok. I need to take it into Illustrator to make the type changes where it has a problem with this font. I outline the font in acrobat but it doesn't recognize it in Illustrator. I delete all but the check in acrobat but in Illustrator it sees everything. Any ideas? - thx

  • #2
    Wrong section, you need the Adobe section.
    A word of warning. Illustrator is not a PDF Editor, fonts are one of the biggest culprits, but there are others.
    Senior Product Manager
    Enfocus

    Comment


    • #3
      Originally posted by abc View Post
      Wrong section, you need the Adobe section.
      A word of warning. Illustrator is not a PDF Editor, fonts are one of the biggest culprits, but there are others.
      Amen to that!

      - Dov

      Comment


      • #4
        I have another issue I'm just not getting after hours. I need to add bleed but it seems to go so far into the page to mirror it, it looks bad. Any tricks to help with that? A set up that would take a 1/16 or less and slide the image, maybe? or any other tricks or videos to help us with the global bleed? thx for any input

        Comment


        • #5
          What application?
          Senior Product Manager
          Enfocus

          Comment


          • #6
            Originally posted by rande View Post
            I have another issue I'm just not getting after hours. I need to add bleed but it seems to go so far into the page to mirror it, it looks bad. Any tricks to help with that? A set up that would take a 1/16 or less and slide the image, maybe? or any other tricks or videos to help us with the global bleed? thx for any input
            If you are using the Pitstop add bleed action the number you enter for left, right, top, bottom works if you enter '0' it starts at the trim box. A positive number moves that far into the page from the trim box to start adding the content. A negative number moves that far into the bleed away from the trim box. In the example below it starts adding the content .0625" (1/16") past the trim box in the bleed area.

            Screen Shot 2019-05-29 at 2.37.35 PM.jpg
            Joe
            OS: Mac OS X 10.10.2 - RIP: Prinergy Connect 6.1 - CTP: Luscher XPose! 160 (2)

            Comment


            • #7
              thx i'll give it a shot

              Comment


              • #8
                Just to reiterate what Joe said. The value is where the mirror starts from based on the Trim Box.
                When we tested we often found objects that did not quite reach the Trim Box, so we added that value.
                The one we use in our standard Action Lists comes very slightly into the Trim Box to resolve anything that might happen due to rounding differences.
                Senior Product Manager
                Enfocus

                Comment


                • #9
                  In most cases you should be able to edit the text in Acrobat Pro. If you outline the text it will not be editable with any software as it is no longer a font. You could outline and open in illustrator but the only changes you could make are the colour and the size.

                  Comment

                  4OverCanonKBAAvantiXeroxSmartsoft (Presswise)Duplo

                  Free Download

                  Collapse

                  Avanti
                  Before You Buy A Print MIS Read This - FREE Download Link To Download

                  CanonKBAXeroxSmartsoft (Presswise)DuploAvantiXeikonGraph Expo4Over

                  What's Going On

                  Collapse

                  There are currently 4780 users online. 102 members and 4678 guests.

                  Most users ever online was 6,855 at 12:33 PM on 06-06-2019.

                  Working...
                  X