Search results

No, it happens on head #1 too, you can see the pic on my first post when the pressman try to switch the plate. Yes, I used indesign, the green is in spot color. I did use host based separation (not in-RIP separation) see attached screen shot. on the RIP computer screen, the green is solid...

Thanks. I posted the plate picture here. The plate looks perfect-solid, no lines

original file was created in Illustrator (PDF). Vector. I can't embed any file other than JPG/PNG I can send the file by email. pm me your email please. thanks

both black and green are on 45 degree.... just realized, this might be the problem. But the green is solid, does it matter ? This problem shows on every job. I thought it was blanket problem on head #2, apparently not. Attached picture of actual plate used (cleaned, but there's a bit of black...

there's an option of 4000 dpi. i'm the prepress guy....

Haven't try at 2400 dpi but will do

updated with real logo on file (pic #3) solid spot color green

We've been having this problem since a long time ago. The black is screened to 77% - no problem The green is supposed to be solid. It's solid on the file and on the screen on the image setter RIP computer. Imagesetter : Agfa Avantra 25 Press : Itek 3985 two color. 150lpi / 4000dpi we tried...

I have no idea how long it was unused. How do I check is the ink tube is plugged with dried ink ? I took the left cover out. Is there any way I can take the tube out of the cartridge housing ?

I just bought a used HP Designjet 4000. Tried to print the color calibration, but it prints nothing. Print heads moved, but no ink come out. No error message. Cleaned all the printheads several times, and washed the printheads cleaner. It doesn't help, just a little bit of yellow and cyan. No...

Hi, I'm wondering if anyone experienced this before. The Magenta, either the ink or the printhead, has been acting up. Before I print the job, I did the nozzle check, it's all good, not perfect, but ok. (See Top Pic) Print 22x32" poster for about 3 sheets (out of 75!) then the magenta quit...

Need help to tell the difference between : Stand alone EFI FIery RIP server (with no monitor - see attached pic) and Integrated one (the one that's built in at the back of the machine) Thanks

In dry climate, where humidity is a major problem, like where I work, trail edge print quality could sometime be an issue as shown below. the tech gave me the solution, basically, I need to adjust the "image transfer" on the paper settings. Hope this helps

Thanks Gordo You Rock !

Thanks Gordo, I think converting spot to CMYK and modifying CMYK setting is what I've done on sample #4. Where can I find the option about maximum black GCR ?

Hi, Looking for expert advice here. We have banding problem. a job that previously been done on offset press with Pantone 653U (uncoated) (see 2nd sample from the left) now done on digital (see 3rd sample from the left) We did our best to match their business card which was done on coated...

Just want to share How to adjust TRC (contrast) after a nightmare color calibration off-the-glass :) In “Services” Mode Press+hold “0” for 4-5 seconds + press “Start” Key in “6789” as the password, press “Confirm” Press “Machine status” Press “Tools” Press “Maintenance” (right column, 2nd...

double post

"Hold" only instead of "DP700 Hold" WORKS ! Thanks WONDERING for your patient and kind help ! Yes ! Problem solved !