1999 Heidelberg 4 color units 2/3 ?

[52 print man]

Ink form 1 on both units won't go on in impression. Need help!

 

[dabob]

Not that I would have the answer but the model would probably help . . .

 

[52 print man]

Not that I would have the answer but the model would probably help . . .

Speed master 52 cpc-1 consule is it possible in consoule I mistakenly shut it off?

 

[52 print man]

On units 2 &3. If I put it in integrated light on at consule it spins on impression. In segregated light off. It won't spin in impression just at idle

 

[dabob]

The last press I ran was a 2/c S line 29 inch with socks . . . whats a console . . . lol . .. I have been in pre-press exclusively since about 92 . .. hopefully some other press pros out there will help you out . . . good luck . . .

 

[aqazi81]

Did you checked the roller size on problematic units?

 

[52 print man]

Did you checked the roller size on problematic units?

Yes. There fine they move when press is on but not in impression in those 2 units only

 

[aqazi81]

Are you talking about the 1st form roller not spining or the intermediate Z roller?

 

[52 print man]

1st ink form. White

 

[aqazi81]

That's pretty strange.... Do you get the strip of the white roller when you drop the rollers on plate? What is the strip width to the oscillator?

 

[52 print man]

That's pretty strange.... Do you get the strip of the white roller when you drop the rollers on plate? What is the strip width to the oscillator?

3 to plate. 4 to oscillator. Form 1 only moves if I put it in integrated. Not segregated. In units 1 & 4. There is no issue.