jerryplatter
New member
I want to convert the super aquamatic system on my 360 to the conventional ab dick water system. Can I just replace the upper and lower water rollers with the conventional rollers? Everything looks the same to me except the composition of the rollers.
If this can't be done, how do I replace the lower rubber roller? According to what I've read, this roller might need to be replaced once a year. This press sat unused for a couple of years before I bought it used, so if these rollers are really that sensitive, it needs to be replaced.
When I cleaned up up and treated the rollers, it ran and printed very well. But, after 1,000 or so impressions, things started to fall apart and no amount of tinkering or adjusting would help. Very frustrating because I like the press and the chain delivery for carbonless especially.
Any help is appreciated.
If this can't be done, how do I replace the lower rubber roller? According to what I've read, this roller might need to be replaced once a year. This press sat unused for a couple of years before I bought it used, so if these rollers are really that sensitive, it needs to be replaced.
When I cleaned up up and treated the rollers, it ran and printed very well. But, after 1,000 or so impressions, things started to fall apart and no amount of tinkering or adjusting would help. Very frustrating because I like the press and the chain delivery for carbonless especially.
Any help is appreciated.