• Best Wishes to all for a Wonderful, Joyous & Beautiful Holiday Season, and a Joyful New Year!

Address labels on Ricoh C900

KCrom

Member
Is anyone running diecut laser labels on their Ricoh C900 successfully? And if so, what brand(and settings)? I asked my local rep for suggestions and they just pointed me to the Ricoh "stock list" that only shows one brand of label tested, and it is a Spinnaker 12x18 sheet, which does me no good.
 
Check with your Ricoh systems engineer, not your sales rep. A new recommended media list was just published on 5/18, with several new entries for Lazerdox label stock.
 
FYI, I just ran 600 sheets from Discount Labels though my Xerox this weekend without any issues.
 
NLprintguy, the recommended media list is not published to the web, but is distributed within Ricoh PPBG, mainly to the PPSEs, who in turn should be distributing it to their customers. The latest list was just published, so should take some time yet to filter out. Rather than waiting, perhaps you should call your Ricoh PPSE or PPS or other rep to inquire about it. The new label configurations that were added to the list are all from Lazerdocs.
 
Is anyone running diecut laser labels on their Ricoh C900 successfully? And if so, what brand(and settings)? I asked my local rep for suggestions and they just pointed me to the Ricoh "stock list" that only shows one brand of label tested, and it is a Spinnaker 12x18 sheet, which does me no good.

In the EU a number of die cut labels have been tested.
Fasson High Gloss Crackback
Label Jet
CLP Adhesive HT CL
CLC Adhesive PCL
Value Peel White

A number of plain lables produced by PCL Labels have also been tested recently with good results.
When testing labels remember NOT to duplex them and select FACE UP printing in the Finishing tab within the Fiery / Creo controller.
 
Last edited:
Pro C900 Media List

Pro C900 Media List

NLprintguy, the recommended media list is not published to the web, but is distributed within Ricoh PPBG, mainly to the PPSEs, who in turn should be distributing it to their customers. The latest list was just published, so should take some time yet to filter out. Rather than waiting, perhaps you should call your Ricoh PPSE or PPS or other rep to inquire about it. The new label configurations that were added to the list are all from Lazerdocs.

The Pro C900 media list is published on the Ricoh Europe web site : https://eu-ricoh-en.custhelp.com/cg...y5zZWFyY2hfbmwmcF9wYWdlPTE!&p_li=&p_topview=1

Ricoh's European Media Qualification Centre in the UK publishes results regularly (at least once a fortnight) however there may be a slight lag before those results are available on the web.
 

InSoft Automation

InSoft Automation Unveils Imp Version 14

Revolutionizing Layout Planning and Automation

InSoft Automation announces the launch of Imp Version 14, the latest iteration of its industry-leading cost-based layout planning software. Packed with cutting-edge features, this release redefines efficiency, automation, and workflow optimization for printing and finishing processes.


Learn more…….

   
Back
Top