Advice needed on digital printed wrist bands


Active member
Hi, we own a print shop equiped with a Heidelberg Speedmaster and an konica Minolta 4070.
We are thiking on strating printing on wrist bands. As far as I could understand, according the research we made, there are two options.
  1. Printing offset on pre-cutted tyvek sheets. In this case I think one color black is sufficient .
  2. Printing digital on pre-cutted wrist bands from an other vendor (not tyvek) which are compatible with digital printing. The brand is the Cintapunto wristbands.
I would like to know if someone tried to print cintapunto wrist bands on a laser printer.

Thank you!
If you do decide to go offset, make sure you use a hard dry ink, oil base and rubber base will not dry very fast on tyvek.


A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.

Learn how…….