Advice needed on digital printed wrist bands

[danos]

Hi, we own a print shop equiped with a Heidelberg Speedmaster and an konica Minolta 4070.
We are thiking on strating printing on wrist bands. As far as I could understand, according the research we made, there are two options.

1. Printing offset on pre-cutted tyvek sheets. In this case I think one color black is sufficient .
2. Printing digital on pre-cutted wrist bands from an other vendor (not tyvek) which are compatible with digital printing. The brand is the Cintapunto wristbands.

I would like to know if someone tried to print cintapunto wrist bands on a laser printer.

Thank you!

 

[jwheeler]

We've used the BlanksUSA sheets of wristbands in the past through our Konica's.

 

[danos]

We've used the BlanksUSA sheets of wristbands in the past through our Konica's.

Thank you! We are located in Europe so I have to find an alternate provider.

 

[jimas67]

If you do decide to go offset, make sure you use a hard dry ink, oil base and rubber base will not dry very fast on tyvek.