AGFA Avantra 44 Nip problem

PrismaColor

New member
Hello, im having problem with my AGFA Avantra 44s the film loads perfectly but when i try to do a film feed it says error 06, but the film is not jammed.
when i take a closer look i found that the Nip motor is spinning backwards.

i anyone can help me please.
 

PrismaColor

New member
The problem is basically that when the agfa loads the film and process the first color (or piece of film ),when the second one is going to start filming, the film does not advance into the take up cassette, and it shows "ERROR 06", thats why we thought that maybe the problem was inside the NIP Drive Assembly or the little motor at the end of the nip, but they seems fine to us, actually you can hear the motor spining in the "film feed", but the film doesnt move.

Please, any help you can give us is very welcomed
 

VladCanada

Well-known member
You have to check NIP's solenoids and flat spring to be sure you have a good pressure between NIP rollers. All part located at Outter NIP Assy
 

Automatically Autonomous Automation

Automatically Autonomous Automation
Although the autonomous car is not quite ready, a lights out print operation is something you can do right now if you have a comprehensive Print MIS (Management Information System). The advantages can put money on your bottom line. So what’s your next step? Link to Article

   
Top